Leak Cable Kit

The LC-KIT contains a 15 foot (4.57m) leader cable and one EOL terminator. Use this LC-KIT with the SC, SC-R, and SC-ZH.

Since sensing cables cannot attach directly to a controller, the leader cable connects the sensing cable to any SeaHawk leak detection controller.

An EOL terminator must be applied to the end of the length of sensing cable – it completes the leak detection circuit. Without an EOL, a length of sensing cable will register a cable break alarm.

Most RLE controllers do ship with an LC-KIT. The LDRA6 does not ship with an LC-KIT, so you will need to purchase one LC-KIT for each zone of leak detection you wish to monitor with that controller.

Sản phẩm cùng nhóm

24V-POE-Kit

PoE solution for designated 24V RLE controllers.

BMS-LD3Z

Use protocols to integrate leak detection into a BMS.

Caution Tags

Fluorescent, adhesive tags clearly mark the location of sensing cable and non-sensing cable. Wrap the tags around any exposed cable at ten-foot intervals and use the space provided on each tag to note the distance from the leak detection controller. Caution tags are sold in packages of 10 tags.

Chemical Sensing Cable

RLE’s patented green chemical sensing cable is used to reliably detect leaks via the presence of acids, bases, and other conductive liquids.