5V-POE-KIT
Our plug and play PoE kit can be used in conjunction with power over ethernet (PoE) devices, including network switches and PoE injectors, to power the following RLE products: F200 WiNG-RXT The 5V-POE-Kit includes one PoE splitter and a 10 foot USB cable to connect the PoE splitter to the compatible equipment. Note that a […]
Aluminum Panel
Lightweight airflow panel for the Triad flooring system
Blanking Panel (19″)
CF-PF-27U-W10 blanking panels fit 19″ server racks with EIA 310-D mounting rails.
Blanking Panel (23″)
23″ Cabinet Blanking panels.
Cable Construction Tools
Tools to assist with the construction and assembly of fluid sensing cable installations.
Cement Filled Panel
Cement filled; Imperial; 1250 lbf; Gray Swirl laminate
ClearView Panel
ClearView; Imperial; 1500 lbf; Crystal White
Dual Port Protocol Converter
Dual port Modbus, BACnet, SNMP converter.
F200-RMB
Rack mount bracket for the F200.
FMS
Stand-alone, Web-enabled appliance hosts its own web pages
FMS Expansion Card A-24
What Functionality Does The Expansion Card A Add To My FMS? Expansion card A adds: 12 analog inputs, individually configurable through jumpers on the card as 4-20mA, 0-5VDC, 0-10VDC, or through the web interface as digital NO (normally open ONLY!) 8 relay outputs Can I Add An Expansion Card To My FMS? Expansion cards can […]
FMS Expansion Card C-48
What Functionality Does The 48V Expansion Card C Add To My FMS? Expansion card C adds: 24 digital NO or NC inputs Can I Add An Expansion Card To My FMS? Expansion cards can be added to an FMS at any time – if you order an FMS from the factory with expansion cards, the […]
FMS Expansion Card-C-24
What Functionality Does The 24V Expansion Card C Add To My FMS? Expansion card C adds: 24 digital NO or NC inputs Can I Add An Expansion Card To My FMS? Expansion cards can be added to an FMS at any time – if you order an FMS from the factory with expansion cards, the […]
Gap Fill Foam
Avalanche-style modular foam sheets.
Hook Lifter
Hook lifter for perforated raised floor panels.
Hybrid Panel
Space saving hybrid airflow panels.
J-Clips
J-clips prevent cable from shifting after installation and are constructed of durable nylon with a self-adhesive backing for easy installation.
J-Clips (SC-C)
J-clips prevent cable from shifting after installation and since they are intended for use with our chemical sensing cable(SC-C), these j-clips are constructed of corrosion resistant nylon with a heavy duty adhesive backing.
Opposed Blade Damper
Opposed blade damper; use w/ slotted & chamfer panels.
Panel Lifter
Double cup lifter for solid raised floor panels.
PSWA-DC-24
Isolated medical grade 24VDC power adapter.
PSWA-DC-24 Kit
24VDC power adapter and interchangeable blade set.
PSWA-DC-24-ST
Isolated 24VDC power w/ stripped wiring connection.
PSWA-DC-24-ST-KIT
24VDC power adapter and interchangeable blade set.
PSWA-DC-5-ST-KIT
5VDC power adapter with interchangeable blade set.
Push Pin Rivet (10/32)
The ICF-PF-PR32 is a black 10/32 push pin rivet for use with server racks with 10/32 threaded EIA mounting rails.
Push Pin Rivet (12/24)
The ICF-PF-PR24 is a black 12/24 push pin rivet for use with server racks with 12/24 threaded EIA mounting rails.
Rigid Doors
Rigid thermal doors custom designed and manufactured specifically for your facility.
Rigid Walls
Rigid thermal walls custom sized and manufactured for your facility.
SD-R01
Spot detector with one relay output.
Sensing Cable Adapter Kit
The sensing cable adapter kit (SCC-KIT) is used to reverse the connector type (male-to-female or female-to-male), and is used when cable has been installed incorrectly. It includes one male/male and one female/female connector and eliminates the need to uninstall and reinstall cable. Use the SCC-KIT with SC, SC-R, and SC-ZH.
Soft Containment
Soft thermal walls and strip doors manufactured specifically for your facility.
Square Hole Rivet
The ICF-PF-BR is a black square hole and snap rivet.
Standing Panel Lifter
Standing double cup lifter for solid raised floor panels.
Thumb Screw
100 thumb screws; White; 10/32; Threaded.
Underfloor Plenum Panels
Partition for Raised Floor Cavity.
Wall Mount Enclosure
RLE offers a powder-coated metal enclosure that comfortably and securely houses RLE controllers. The enclosure has a hole in each of its four corners to simplify wall-mounting, and knock-outs on the top and bottom to house conduit and cables. The front door can be closed and latched shut to add a level of security and protection.
WiNG-AIR10
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-AIR10 allows you to monitor air velocity at a range of 10 meters per second (+/-5%) and incorporate that data into your WiNG monitoring system.
WiNG-AIR3
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-AIR3 allows you to monitor air velocity at a range of 3 meters per second (+/-10%) and incorporate that data into your WiNG monitoring system.
WiNG-AIR4
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-AIR4 allows you to monitor air velocity at a range of 4 meters per second (+/-5%) and incorporate that data into your WiNG monitoring system.
WiNG-DAP
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-DAP allows you to monitor differential air pressure in a wide variety of spaces, including plenum, ducts, and server racks.
WiNG-T
Designed for use with WiNG-MGR and BMS-WING systems.
WiNG-TH
Designed for use with WiNG-MGR and BMS-WING systems.
Woodcore Panel
Grey starlight laminate-topped wood core floor panel with integral trim.
Control Unit
The Control Unit (CU) manages communication, alarms, and integration across the entire Cellwatch system.
DCM6-H
The DCM6-H delivers accurate monitoring across 4-16 volt cells, including lead-acid and NiCad. With ripple detection and robust protection, it provides flexibility and confidence in demanding systems.
DCM6-L
The DCM6-L delivers precise monitoring of 2-volt cells. From telecom to utilities, the DCM6–L ensures stable operation and early detection of failing jars, protecting critical low-voltage systems.
DCM6-L-IECEx
Ex-Rated battery monitoring unit purpose built for Safety and Hazardous Environments.
DCM6-R
The DCM6-R monitors strings up to 300 volts with certified ripple measurement. Engineered for utilities and data centers, the DCM6-R delivers confidence and precision in large-scale applications.
Frontier Unit
Cellwatch Frontier automates daily battery monitoring to meet NERC PRC-005-06 requirements.
iBMU
The iBMU brings every Cellwatch module together into one central hub. With built-in remote access, multiple communication interfaces, and ready-to-go licensing, it delivers complete oversight from a single point of control.
Thermal Runaway Controller
The TRC delivers string-level thermal safety by combining continuous monitoring with 10 relay outputs for protective response.
1WIRE-THS
1-Wire temp and humidity sensor; RJ11 connector.
1WIRE-TS
1-Wire temperature sensor; RJ11 connector.
6″x4″ Rectangular Grommet
Plugging holes is one of the easiest ways to improve airflow and efficiency in any raised floor environment. If air can escape through holes in a raised floor you limit the effectiveness of containment and decrease your cooling efficiency. RLE’s patented fire rated foam grommets seal cutouts in raised floors and show an immediate […]
6″x6″ Rectangular Grommet
Plugging holes is one of the easiest ways to improve airflow and efficiency in any raised floor environment. If air can escape through holes in a raised floor you limit the effectiveness of containment and decrease your cooling efficiency. RLE’s patented fire rated foam grommets seal cutouts in raised floors and show an immediate […]
6″x9″ Rectangular Grommet
Plugging holes is one of the easiest ways to improve airflow and efficiency in any raised floor environment. If air can escape through holes in a raised floor you limit the effectiveness of containment and decrease your cooling efficiency. RLE’s patented fire rated foam grommets seal cutouts in raised floors and show an immediate […]
BMS-1WIRE
Use protocols to integrate 1-wire sensors into a BMS.
BMS-WiNG
The BMS-WiNG leverages RLE’s WiNG wireless sensor technology and allows it to integrate via protocols into any building management system (BMS) or alarm monitoring system.
BMS-WiNG
Use protocols to integrate WiNG sensors into a BMS.
Ceilings
Shrink-away and mechanical ceilings for cold aisle containment
Chamfer Panel
Chamfered airflow panels for the Triad raised flooring system.
MD3
One wired digital motion detector.
MD3-KIT
Wired digital motion detector with power supply.
MDS
One wired magnetic door sensor.
Power Fail Monitor
Sends an alarm when utility power is lost.
Round Grommet
Round 6″ foam raised floor grommet.
Slotted Panel
Slotted airflow panels for the Triad raised flooring system.
SMK
Wired photoelectric smoke detector.
SMK-KIT
Wired photoelectric smoke detector with power supply.
Steel Panel
Solid steel panel with built-in handles and levelers; 4,000 lb load rating.
TEAMS
Wired temperature sensor with j-box mounting.
WA-DC-12
12VDC power adapter; use with the MD3.
WIFI-CO2
Wi-Fi temp, humidity, & CO2 sensor; use w/ WiNG-MGR or BMS.
WIFI-TH
Wi-Fi temp/humidity sensor; use w/ WiNG-MGR or BMS.
WiNG-ANLG
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-ANLG sensor allows you to take a wired analog input and convert it to a wireless signal that can be implemented into a WiNG monitoring system.
WiNG-CO2
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-CO2 is a single wireless device that measures carbon dioxide, temperature, and humidity.
WiNG-DI
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-DI sensor allows you to take a wired digital input and convert it to a wireless signal that can be implemented into a WiNG monitoring system.
WiNG-RTD
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-RTD allows you to take a 1K Ohm platinum RTD (PT1000) temperature sensor and convert it to a wireless signal that can be implemented into a WiNG monitoring system.
WiNG-RXT
The WiNG-RXT provides an extra boost for WiNG signals in complex environments.
WiNG-THRM
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-THRM allows you to place a temperature sensor in an environment that may be unfriendly to a wireless transmission – in ductwork, in wells, in pipes, or in refrigerators and freezers – while the transmitter portion of the sensor remains outside that environment, sending the temperature reading back to the WiNG controller.
WIRED-TH
The WIRED-TH is a wired temperature and humidity sensor with a 2% RH accuracy.
WIRED-TH-D
The WIRED-TH-D is a wired temperature and humidity sensor with a 2% RH accuracy and an LCD display.
WIRED-TH-O
Wired outdoor temperature and humidity sensor. Compatible with the FMS.
24V-POE-Kit
PoE solution for designated 24V RLE controllers.
BMS-LD3Z
Use protocols to integrate leak detection into a BMS.
Cable Evaluator
Test sensing cable for contamination or detected leaks.
Caution Tags
Fluorescent, adhesive tags clearly mark the location of sensing cable and non-sensing cable. Wrap the tags around any exposed cable at ten-foot intervals and use the space provided on each tag to note the distance from the leak detection controller. Caution tags are sold in packages of 10 tags.
Chemical Sensing Cable
RLE’s patented green chemical sensing cable is used to reliably detect leaks via the presence of acids, bases, and other conductive liquids.
Conductive Fluid Sensing Cable
Parameter’s patented orange sensing cable reliably detects the presence of water leaks and other conductive fluids.
EOL
An end-of-line terminator (EOL) must be applied to the end of the length of sensing cable – it completes the leak detection circuit. Without an EOL, a length of sensing cable will register a cable break alarm.
F200
Single zone leak detection and inputs for facility monitoring.
LD1000
The SeaHawk LD1000 single zone leak and water detection controller monitors up to 1,000 feet (305 meters) of sensing cable. It is compatible with SC, SC-R, and SC-ZH sensing cables and SeaHawk SD-Z and SD-Z1 spot detectors.
LD1500
This LD1500 can support cable runs up to 1500ft.
LD2100
The LD2100 supports cable runs up to 2100ft.
LD310
The SeaHawk LD310 single zone leak detection controller monitors up to 300 feet (91 meters) of sensing cable.
LD310-24V
The LD310-24V single zone leak detection controller monitors up to 300 feet (91 meters) of sensing cable.
LD5200
The LD5200 is our most robust, feature-rich leak detection controller. It is ideal for monitoring large leak detection networks.
LDRA6
Six zone leak detection / remote alarm annunciation.
Leak Cable Kit
The LC-KIT contains a 15 foot (4.57m) leader cable and one EOL terminator. Use this LC-KIT with the SC, SC-R, and SC-ZH.
Low-Smoke Zero Halogen Sensing Cable
Low smoke, zero halogen (LSZH) cables have all the same leak detection properties of our orange sensing cables, but are custom compounded to produce minimal smoke and no halogen when exposed to fire.
Non-Sensing Cable
Use non-sensing cable (NSC) to extend a control panel’s leader cable to an area where sensing cable is needed.
PSWA-DC-5
5VDC power adapter; for the LD310 in int’l locations.
PSWA-DC-5-KIT
5VDC power adapter and interchangeable blade set.
Rodent Resistant Sensing Cable
Rodent repellent cables have all the same leak detection properties of our orange sensing cables, plus chemical additives and a cable color designed to repel rodents.
SD
Spot leak detector designed to work with our FMS controller.
SD-R02
Spot detector with 2 relay outputs, LEDs, audible alarm.
SD-Z
Spot detector; use with any RLE controller.
SD-Z1
Spot detector; use with F200, LD310, LD1000, and LDRA6.
Single Run Kit
Since chemical cable and conductive fluid sensing cables have different connectors, a single run kit (SR-KIT) is used to join these two different cables inline so they can be monitored by a single leak detection controller. The SR-KIT does not affect the accuracy of system readings or limit the amount of sensing cable that can […]
WA-AC-24-ST
24VAC power adapter; use with LD1000, SD-RO1, SMK.
WA-DC-5-ST
5VDC power adapter; use with the LD310.
WIFI-LD-LC
Wi-Fi wireless transmitter for SC leak detection cable.
WIFI-LD-M
Wi-Fi wireless transmitter for SC-C leak detection cable.
WIFI-LD-SPOT
Wi-Fi wireless transmitter with SD-Z1 spot detector.
WiNG-LD-LC
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-LD-LC pairs our WiNG wireless transmitter with RLE’s patented leak detection sensing cable to detect and report leaks in any facility.
WiNG-LD-M
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-LD-M pairs our WiNG wireless transmitter with RLE’s chemical leak detection sensing cable to detect and report leaks in any facility.
WiNG-LD-SPOT
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-LD-SPOT pairs our WiNG wireless transmitter with an SD-Z1 spot detector to detect and report leaks in any facility.
WiNG-MGR-v2
WiNG is a complete system of sensors, gateway manager, and range extenders that allows you to monitor your facility for changes in conditions including: temperature, humidity, dew point, CO2, differential pressure, and fluid leaks.
X-Connector
With one input and three outputs, the X-Connector (X-CON) allows cable to be branched in three separate directions. It is primarily used in distance-read systems and simulates 150 feet of sensing cable in your leak detection system. Multiple X-CONs can be used in a system without affecting accuracy. The X-CON includes two end-of-line (EOL) terminators.