Sản phẩm
32 sản phẩm · Giám sát môi trường
1WIRE-THS
1-Wire temp and humidity sensor; RJ11 connector.
1WIRE-TS
1-Wire temperature sensor; RJ11 connector.
6″x4″ Rectangular Grommet
Plugging holes is one of the easiest ways to improve airflow and efficiency in any raised floor environment. If air can escape through holes in a raised floor you limit the effectiveness of containment and decrease your cooling efficiency. RLE’s patented fire rated foam grommets seal cutouts in raised floors and show an immediate […]
6″x6″ Rectangular Grommet
Plugging holes is one of the easiest ways to improve airflow and efficiency in any raised floor environment. If air can escape through holes in a raised floor you limit the effectiveness of containment and decrease your cooling efficiency. RLE’s patented fire rated foam grommets seal cutouts in raised floors and show an immediate […]
6″x9″ Rectangular Grommet
Plugging holes is one of the easiest ways to improve airflow and efficiency in any raised floor environment. If air can escape through holes in a raised floor you limit the effectiveness of containment and decrease your cooling efficiency. RLE’s patented fire rated foam grommets seal cutouts in raised floors and show an immediate […]
BMS-1WIRE
Use protocols to integrate 1-wire sensors into a BMS.
BMS-WiNG
The BMS-WiNG leverages RLE’s WiNG wireless sensor technology and allows it to integrate via protocols into any building management system (BMS) or alarm monitoring system.
BMS-WiNG
Use protocols to integrate WiNG sensors into a BMS.
Ceilings
Shrink-away and mechanical ceilings for cold aisle containment
Chamfer Panel
Chamfered airflow panels for the Triad raised flooring system.
MD3
One wired digital motion detector.
MD3-KIT
Wired digital motion detector with power supply.
MDS
One wired magnetic door sensor.
Power Fail Monitor
Sends an alarm when utility power is lost.
Round Grommet
Round 6″ foam raised floor grommet.
Slotted Panel
Slotted airflow panels for the Triad raised flooring system.
SMK
Wired photoelectric smoke detector.
SMK-KIT
Wired photoelectric smoke detector with power supply.
Steel Panel
Solid steel panel with built-in handles and levelers; 4,000 lb load rating.
TEAMS
Wired temperature sensor with j-box mounting.
WA-DC-12
12VDC power adapter; use with the MD3.
WIFI-CO2
Wi-Fi temp, humidity, & CO2 sensor; use w/ WiNG-MGR or BMS.
WIFI-TH
Wi-Fi temp/humidity sensor; use w/ WiNG-MGR or BMS.
WiNG-ANLG
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-ANLG sensor allows you to take a wired analog input and convert it to a wireless signal that can be implemented into a WiNG monitoring system.
WiNG-CO2
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-CO2 is a single wireless device that measures carbon dioxide, temperature, and humidity.
WiNG-DI
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-DI sensor allows you to take a wired digital input and convert it to a wireless signal that can be implemented into a WiNG monitoring system.
WiNG-RTD
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-RTD allows you to take a 1K Ohm platinum RTD (PT1000) temperature sensor and convert it to a wireless signal that can be implemented into a WiNG monitoring system.
WiNG-RXT
The WiNG-RXT provides an extra boost for WiNG signals in complex environments.
WiNG-THRM
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-THRM allows you to place a temperature sensor in an environment that may be unfriendly to a wireless transmission – in ductwork, in wells, in pipes, or in refrigerators and freezers – while the transmitter portion of the sensor remains outside that environment, sending the temperature reading back to the WiNG controller.
WIRED-TH
The WIRED-TH is a wired temperature and humidity sensor with a 2% RH accuracy.
WIRED-TH-D
The WIRED-TH-D is a wired temperature and humidity sensor with a 2% RH accuracy and an LCD display.
WIRED-TH-O
Wired outdoor temperature and humidity sensor. Compatible with the FMS.