Sản phẩm
36 sản phẩm · Phát hiện rò rỉ
24V-POE-Kit
PoE solution for designated 24V RLE controllers.
BMS-LD3Z
Use protocols to integrate leak detection into a BMS.
Cable Evaluator
Test sensing cable for contamination or detected leaks.
Caution Tags
Fluorescent, adhesive tags clearly mark the location of sensing cable and non-sensing cable. Wrap the tags around any exposed cable at ten-foot intervals and use the space provided on each tag to note the distance from the leak detection controller. Caution tags are sold in packages of 10 tags.
Chemical Sensing Cable
RLE’s patented green chemical sensing cable is used to reliably detect leaks via the presence of acids, bases, and other conductive liquids.
Conductive Fluid Sensing Cable
Parameter’s patented orange sensing cable reliably detects the presence of water leaks and other conductive fluids.
EOL
An end-of-line terminator (EOL) must be applied to the end of the length of sensing cable – it completes the leak detection circuit. Without an EOL, a length of sensing cable will register a cable break alarm.
F200
Single zone leak detection and inputs for facility monitoring.
LD1000
The SeaHawk LD1000 single zone leak and water detection controller monitors up to 1,000 feet (305 meters) of sensing cable. It is compatible with SC, SC-R, and SC-ZH sensing cables and SeaHawk SD-Z and SD-Z1 spot detectors.
LD1500
This LD1500 can support cable runs up to 1500ft.
LD2100
The LD2100 supports cable runs up to 2100ft.
LD310
The SeaHawk LD310 single zone leak detection controller monitors up to 300 feet (91 meters) of sensing cable.
LD310-24V
The LD310-24V single zone leak detection controller monitors up to 300 feet (91 meters) of sensing cable.
LD5200
The LD5200 is our most robust, feature-rich leak detection controller. It is ideal for monitoring large leak detection networks.
LDRA6
Six zone leak detection / remote alarm annunciation.
Leak Cable Kit
The LC-KIT contains a 15 foot (4.57m) leader cable and one EOL terminator. Use this LC-KIT with the SC, SC-R, and SC-ZH.
Low-Smoke Zero Halogen Sensing Cable
Low smoke, zero halogen (LSZH) cables have all the same leak detection properties of our orange sensing cables, but are custom compounded to produce minimal smoke and no halogen when exposed to fire.
Non-Sensing Cable
Use non-sensing cable (NSC) to extend a control panel’s leader cable to an area where sensing cable is needed.
PSWA-DC-5
5VDC power adapter; for the LD310 in int’l locations.
PSWA-DC-5-KIT
5VDC power adapter and interchangeable blade set.
Rodent Resistant Sensing Cable
Rodent repellent cables have all the same leak detection properties of our orange sensing cables, plus chemical additives and a cable color designed to repel rodents.
SD
Spot leak detector designed to work with our FMS controller.
SD-R02
Spot detector with 2 relay outputs, LEDs, audible alarm.
SD-Z
Spot detector; use with any RLE controller.
SD-Z1
Spot detector; use with F200, LD310, LD1000, and LDRA6.
Single Run Kit
Since chemical cable and conductive fluid sensing cables have different connectors, a single run kit (SR-KIT) is used to join these two different cables inline so they can be monitored by a single leak detection controller. The SR-KIT does not affect the accuracy of system readings or limit the amount of sensing cable that can […]
WA-AC-24-ST
24VAC power adapter; use with LD1000, SD-RO1, SMK.
WA-DC-5-ST
5VDC power adapter; use with the LD310.
WIFI-LD-LC
Wi-Fi wireless transmitter for SC leak detection cable.
WIFI-LD-M
Wi-Fi wireless transmitter for SC-C leak detection cable.
WIFI-LD-SPOT
Wi-Fi wireless transmitter with SD-Z1 spot detector.
WiNG-LD-LC
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-LD-LC pairs our WiNG wireless transmitter with RLE’s patented leak detection sensing cable to detect and report leaks in any facility.
WiNG-LD-M
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-LD-M pairs our WiNG wireless transmitter with RLE’s chemical leak detection sensing cable to detect and report leaks in any facility.
WiNG-LD-SPOT
Designed for use with the WiNG-MGR and BMS-WING systems, the WiNG-LD-SPOT pairs our WiNG wireless transmitter with an SD-Z1 spot detector to detect and report leaks in any facility.
WiNG-MGR-v2
WiNG is a complete system of sensors, gateway manager, and range extenders that allows you to monitor your facility for changes in conditions including: temperature, humidity, dew point, CO2, differential pressure, and fluid leaks.
X-Connector
With one input and three outputs, the X-Connector (X-CON) allows cable to be branched in three separate directions. It is primarily used in distance-read systems and simulates 150 feet of sensing cable in your leak detection system. Multiple X-CONs can be used in a system without affecting accuracy. The X-CON includes two end-of-line (EOL) terminators.